"industrial centrifugal fans"

فن دمنده گریز از مرکز فشار بالا ساخته شده از فولاد کربنی بادوام. فشار 3031-16250Pa و جریان هوا 8792-123090m³/h را ارائه می دهد. دارای بلبرینگ SKF/FAG، گارانتی 1 ساله و تنظیمات سفارشی برای کاربردهای صنعتی.

Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan Introduction The Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles

Q235 Single Inlet Antiwear Industrial Boiler ID Centrifugal Boiler Fan Introduction The Q235 Single Inlet Antiwear Industrial Boiler ID Centrifugal Boiler Fan ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of

Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan Introduction 1.The Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be

Stainless Steel Explosion Protection Flue Gas Centrifugal Blower Fan Introduction The Stainless Steel Explosion Protection Flue Gas Centrifugal Blower Fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust,

V-Belt Driving Stainless Steel Flue Gas Centrifugal Blower Fan Introduction The V-Belt Driving Stainless Steel Flue Gas Centrifugal Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. The V-Belt Driving Stainless Steel

Aluminium Alloyed Single Inlet Large Capacity Exhaust Centrifugal Flow Fan Introduction The 4-16 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It can also be made into explosion-proof and flame

Alloy Steel V-Belt Driven Backward Curved Cooling Centrifugal Flow Fan Introduction It can also be made into explosion-proof and flame-retardant type according to the requirements of use. It is suitable for occasions with flammable, explosive and corrosive gases. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80°C, and similar gas properties are also available.

Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan Introduction The Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving